Optical Disc Technology  » Build Your Own Computer : What to Look for in a Case

Build Your Own Computer : What to Look for in a Case

Build Your Own Computer : What to Look for in a Case

By Stephen Bucaro

Why would you want to build your own computer? Not to save

money. With a decent manufactured computer costing less

than $400.00, it will cost you more to buy the parts to

build your own. There are five advantages to building

rather than buying.

1. Most manufactured computers are build using proprietary

components. When (not if) your computer breaks down, you

can’t use off-the-shelf replacement parts. You have to pay

a lot more for the manufacturer's proprietary replacement

parts.

2. Low cost manufactured computers use the cheapest

components. These components are marginal or below

specifications. When you build your own computer, you

select the quality of each component.

3. When you have built your own computer, you are more

knowledgeable and capable of performing your own

troubleshooting. You don’t have to pay $75.00 per hour for

a service technician.

4. When your computer becomes outdated, you can easily

upgrade it yourself. You will be a better judge of when

its more logical to build a new computer from scratch, or

to update the old one.

5. You will feel the pride and confidence of having built

your own computer. And, you will have proof that you

really are smarter than your friends!

Yes, you can build your own computer. Today’s

plug-and-play mother boards with on-board video, sound,

and network circuitry make it easy. You can build your own

computer in 90 minutes. 30 minutes to build the computer

plus an hour of waiting while installing the operating

system.

When I build a computer, the first component that I

consider is the case. Here is what to look for in a case:

* Beige case...

* The form factor

Make sure your case style matches the form factor of

available motherboards. Most motherboards today are the

ATX form factor. You should buy an ATX style case. Do not

buy an AT style case. The AT style case has been obsolete

for years. Some computer component providers are trying to

unload their obsolete AT style cases to inexperienced

computer hobbyists.

* The power supply

Don’t buy a case with only a 200 or 250 watt power supply.

A 300 watt power supply should be sufficient, but if you

plan to install a lot of expansion cards like 3D graphics

accelerators, multiple hard drives, CD burners, etc. then

you need to consider a case with a more powerful power

supply.

A Pentium 4 motherboard uses an extra four pin connector

to provide extra 12 volt power required for the CPU. If

you plan to build a Pentuim 4 based computer, make sure

the case has a "pentuim 4 ready" power supply.

* Drive bays

The minimum drive bay requirement is; one 5.25 inch

external bay, one 3.5 inch external bay; and one 3.5 inch

internal bay. This allows you install a CD-ROM drive,

a floppy drive, and a hard disk drive.

However, I would recommend purchasing a case with; two

5.25 inch external bays, one 3.5 inch external bay; and

two 3.5 inch internal bays. This gives you a little extra

expansion capacity.

* Side Panel

Get a case with a removable side panel. This gives you

easy access to the inside of the case. Some cases come

with a one piece inverted U shaped cover. It’s a real pain

to wrestle this type of cover into place.

* Floppy disk slot

I prefer to avoid cases with a built-in floppy disk slot.

With RW-CD’s becoming more common, the floppy disks days

could be numbered. When they become obsolete you will be

stuck with a funny slot on the front of your computer.

* Beige case

Avoid cases that are not the standard beige color. Off the

shelf floppy drives and CD Drives only come in beige, and

it looks nicer if they match the case.

* Desk-top or tower case

I don’t think you can find a desk-top style case today. If

you do find one, consider the amount of desk area the case

will cover. You will most likely have to place your

monitor on top of the case. If you have a heavy 19 inch

CRT monitor, make sure the case is constructed solidly

enough to support the monitor.

Although you can’t save money, there are many other

advantages to building your own computer. This article

points out some important things to look for when

selecting a case for your computer.

----------------------------------------------------------

Permission is granted for the above article to forward,

reprint, distribute, use for ezine, newsletter, website,

offer as free bonus or part of a product for sale as long

as no changes are made and the byline, copyright, and the

resource box below is included.

----------------------------------------------------------

Resource Box:

Copyright(C)2002 Bucaro TecHelp. To learn how to maintain

your computer and use it more effectively to design a Web

site and make money on the Web visit

http://bucarotechelp.com

To subscribe to Bucaro TecHelp Newsletter Send a blank

email to bucarotechelp-subscribe@topica.com

----------------------------------------------------------

About the Author

None